See also:

Multi function display
1) Multi function display switching knob With the ignition switch in the “ON” position, each successive press of the multi function display switching knob toggles the display in the following s ...

Trunk light (Legacy)
1. Push both sides of the light cover, and then remove the cover by pulling it out. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

Checking the coolant level
Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “LOW” level mark, ad ...