Engine coolant

NOTE
Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors.

For the checking, adding and replacing procedure, or other details, refer to

For the checking, adding and replacing procedure, or other details, refer to “Cooling system”.

    See also:

    Canceling the function for meter/gauge needle movement upon turning on the ignition switch
    It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. 1. Turn the ignition switch ...

    System maintenance
    Changing the batteries • Do not let dust, oil or water get on or in the remote engine start transmitter when replacing the battery. • Be careful not to damage the printed circuit board in the re ...

    Checking the brake pedal reserve distance
    1) More than 2.56 in (65 mm) Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure the distance between the upper surface of the pedal pad and the floor. When th ...