See also:

Initializing the registered data
To initialize the registered data, perform the following procedure. 1. Select the “INITIALIZE” menu. 2. Select the “CONFIRM” menu. First “PLEASE WAIT”, then “INITIALIZED” is displayed. The reg ...

Canceling the function for meter/gauge needle movement upon turning on the ignition switch
It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. Turn the ignition switch to th ...

Checking the brake pedal reserve distance
1) More than 2.56 in (65 mm) Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure the distance between the upper surface of the pedal pad and the floor. When the me ...