Downloading picture

Perform the following procedure to download a picture to be used as screensaver.

1. Connect a USB storage device. Refer to “Connecting USB storage device / iPod®”.

2. Select the “Picture Download” menu by operating the “TUNE/TRACK/CH” dial.

For details, refer to “Audio settings (type D audio)”.

3. Select the preferred JPEG file by operating the “TUNE/TRACK/CH” dial.

4. Select “Wide” or “Normal” by operating the “TUNE/TRACK/CH” dial.

NOTE
- JPEG files that are 10 MB or less can be saved.

- If the file name is too long, the file may not be saved.

- Up to two JPEG files can be saved in the in-vehicle equipment.

- If the aspect ratio of the displayed picture is 16:9, “Wide” cannot be selected.

- If the aspect ratio of the displayed picture is 4:3, “Normal” cannot be selected.

    See also:

    Overview
    Subaru of America, Inc. announced that the all-new 2010 Subaru Legacy sedan will debut at the 2009 New York International Auto Show, providing a bolder design language in a larger midsize package. ...

    Service mode
    In service mode, the remote start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. ...

    Type B
    1. Raise the wiper arm off the windshield. 1) Open the cover 2) Pull down the wiper blade 2. Remove the wiper blade assembly by opening the cover and pulling it down in the direction shown in the ...