AT OIL TEMP warning light (AT models)
If this light illuminates when the engine is running, it may indicate that the automatic transmission fluid temperature is too hot.
If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.
Automatic transmission control system warning
If the light flashes after the engine starts, it may indicate that the automatic transmission control system is not working properly.
Contact your nearest SUBARU dealer for service immediately.
See also:
Starting the engine
Do not operate the starter motor continuously for more than 10 seconds.
If the engine fails to start after operating the starter for 5 to 10 seconds, wait for 10 seconds or more before trying aga ...
Turbo models
The engine is designed to operate at maximum performance using premium unleaded
gasoline with an octane rating of 93 AKI or higher. If 93 AKI fuel is not readily
available in your area, unleaded g ...
Locking the doors
Press the “” button to lock all doors
and rear gate (Outback). An electronic chirp will sound once and the turn signal
lights will flash once.
If any of the doors (or the rear gate/trunk lid) i ...