Security ID plate
Security ID plate
1) Key number plate 2) Security ID plate
The security ID is stamped on the security ID plate attached to the key set. Write down the security ID and keep it in another safe place, not in the vehicle.
This number is needed to make a replacement key if you lose your key or lock it inside the vehicle.
This number is also needed for replacement or repair of the engine control unit, integrated unit, and combination meter.
See also:
Type A
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to rem ...
SRS airbag system warning light
When the ignition switch is turned to the “ON” position, the SRS airbag system
warning light will illuminate for approximately 6 seconds and turn off. This shows
the SRS frontal airbag and SRS sid ...
Checking the brake pedal free play
1) 0.08 – 0.18 in (2 – 5 mm)
Stop the engine and firmly depress the brake pedal several times. Lightly pull
the brake pedal up with one finger to check the free play with a force of less than
2 ...