Entering the vehicle while it is running via remote start

1. Unlock the vehicle doors using the remote keyless entry system. If the vehicles doors are unlocked manually using the key, the vehicles alarm system will trigger (if the alarm system is armed prior to activating the remote engine start system) and the engine will turn off. Inserting the key into the ignition switch and turning it to the ON position or pressing the unlock button on the remote keyless entry transmitter will disarm the alarm system. Refer to Alarm
on the remote keyless entry transmitter will disarm the alarm system. Refer to Alarm system F2-15.

2. Enter the vehicle.

3. The engine will shut down when any door or trunk/rear gate is opened.

4. Insert the key into the ignition switch and turn to the START position to restart the engine.

    See also:

    To increase the speed (by the RES/ SET switch)
    Press the RES/SET switch to the RES side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as ...

    Refrigerant for your climate control system
    Your air conditioner uses ozone friendly refrigerant HFC134a. Therefore, the method of adding, changing or checking the refrigerant is different from the method for CFC12 (freon). Consult your SUB ...

    Brake pad and lining
    While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times. ...