Stowage of the cargo area cover
The cargo area cover can be stowed in under the cargo floor.

1. To open the lid, pull the handle up.

2. To keep the lid open, hang the hook (provided on the back of the lid) on the rear edge of the roof.

3. Remove the left and right parts of the cargo floor lid.

4. Stow the cover housing in the cargo area end.
See also:
Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration
zones” map shown above to verify that
the compass zone setting is correct for
your geographical location.
2. Press and hold ...
Trunk light
1. Remove the cover by squeezing its sides and pulling it.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the cover. ...
Windows
To avoid serious personal injury
caused by entrapment, always conform
to the following instructions
without exception.
- When operating the power windows,
be extremely careful to
preven ...
