Ventilation
To force outside air through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position.
2. Press the “
” button.
3. Set the temperature control dial all the way left.
4. Set the fan speed control dial to the desired speed.
When driving on a dusty road, set the air inlet control button to the ON position.
WARNING
Continued operation in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears.
See also:
Safety precautions
WARNING
● For safety reasons, avoid operating of the cell phone while driving.
● Do not make a phone call while driving. When you have an incoming call, stop the
vehicle in a safe loca ...
Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration
zones” map shown above to verify that
the compass zone setting is correct for
your geographical location.
2. Press and hold ...
Installing a rearward facing child restraint
1. Place the child restraint system in the rear seating position.
2. Run the lap and shoulder belt through or around the child restraint system
following the instructions provided by its manufact ...
