Synthetic oil
You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade shown in this Owner’s Manual. Refer to “Engine oil” F12-5. Also, you must follow the oil and filter changing intervals shown in the Warranty and Maintenance booklet.
NOTE
Synthetic oil of the grade and viscosity noted in chapter 12 is the required engine oil for optimum engine performance.
Conventional oil may be used if synthetic oil is unavailable.
See also:
Operation
1) Driver’s side
2) Passenger’s side
The SRS airbag can function only when the ignition switch is in the “ON” position.
The SUBARU advanced frontal airbag system is designed to determine the act ...
How to jump start
1. Make sure the booster battery is 12 volts and the negative terminal is grounded.
2. If the booster battery is in another vehicle, do not let the two vehicles
touch.
3. Turn off all unnecessary ...
Map lights
Type A
Type B
To turn on the map light, push the switch.
To turn it off, push the switch again.
When leaving the vehicle, make sure the lights are turned off to avoid battery discharge.
NOTE
For ...