To use as semi-automatic climate control system
Each function can be individually set to AUTO mode independently of the others.
Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adjusted as desired.
The temperature can be set within a range of 65 to 858F (20 to 308C).
See also:
High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the
combination meter also illuminates.
To swit ...
Arming the system
CAUTION
In passive mode, the system will automatically activate the alarm but WILL NOT
automatically lock the doors. In order to lock the doors you must either lock them
as indicated in step 4 be ...
Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender
lining” F11- 7.
2. Remove the bulb cover, by turning it counterclockwise.
3. Disconnect the electrical connector.
...
