Ventilation

To force outside air through the instrument panel outlets:
Ventilation

To force outside air through the instrument panel outlets:
1. Set the air inlet selection button to the OFF position.

2. Set the airflow control dial to the “3. Set the temperature control dial all the way left.” position.

3. Set the temperature control dial all the way left.

4. Set the fan speed control dial to the desired speed.

When driving on a dusty road, set the air inlet selection button to the “ON” position.

Continued operation with the air inlet selection button in the ON position may fog up the windows.

Continued operation with the air inlet selection button in the ON position may fog up the windows.

Switch to the OFF position as soon as the outside dusty condition clears.

    See also:

    Use of engine braking
    Remember to make use of engine braking in addition to foot braking. When descending a grade, if only the foot brake is used, the brakes may start working improperly because of brake fluid overheating, ...

    Traction AA, A, B, C
    The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government t ...

    START
    CAUTION Do not turn the ignition switch to the “START” position while the engine is running. The engine is started in this position. The starter cranks the engine to start it. When the key is rele ...