See also:

Connecting a trailer
1. Remove the receiver cover from the hitch receiver tube. Then insert the ball mount into the hitch receiver tube. 2. Insert the hitch pin into the hole on the hitch receiver tube so that the ...

Trunk light
1. Remove the cover by squeezing its sides and pulling it. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

Brake pad and lining
While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times. ...