MT models

The key can be turned from “Acc” to “LOCK” only when the key is pushed in while turning it.

The key can be turned from “Acc” to “LOCK” only when the key is pushed in while turning it.

    See also:

    Headlight flasher
    CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as ...

    Compass zone adjustment
    Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the swi ...

    Behavior with key lock-in prevention function non-operational
    ● If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door is locked ...