Wheel alignment

*: The difference between right-hand camber and left-hand camber should be

*: The difference between right-hand camber and left-hand camber should be within 45’ or less.

    See also:

    Canceling the function for meter/gauge needle movement upon turning on the ignition switch
    It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. 1. Turn the ignition switch ...

    Checking the clutch pedal free play
    1) 0.16 – 0.43 in (4.0 – 11.0 mm) Lightly depress the clutch pedal down with your finger until you feel resistance, and check the free play. If the free play is not within proper specification, co ...

    Selecting category (only when connecting iPod®)
    When the button is pressed for less than 1.5 seconds, the iPod® menu is displayed. Each time you turn the “TUNE/TRACK/ CH” dial clockwise, the displayed category changes in the following se ...