Airflow control dial

Each dial position activates the following air outlets.

outlets (Ventilation): Instrument panel outlets

outlets and (Bi-level): Instrument panel outlets and foot outlets

outlets of (Heat): Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.)

outlets, (Heat-def): Windshield defroster outlets, foot outlets and both side outlets of the instrument panel

both : Windshield defroster outlets and both side outlets of the instrument panel

For details, refer to “Airflow selection”.

NOTE
When the dial is placed in the “or” or “conditioner compressor” position, the air conditioner compressor operates automatically regardless of the position of the air conditioner button to defog the windshield more quickly. However the indicator on the air conditioner button will not illuminate. At the same time, the air inlet selection is automatically set to “outside air” mode.

In this state, you cannot select “recirculation” mode by manually pressing the air inlet selection button.

Also, you cannot stop the air conditioner compressor by pressing the air conditioner button.

    See also:

    To increase the speed (by the “RES/ SET” switch)
    Press the “RES/SET” switch to the “RES” side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as ...

    Sensor for the auto on/off headlights
    The sensor is on the instrument panel as shown in the illustration. CAUTION If any object is placed on or near the sensor, the sensor may not detect the level of the ambient light correctly and ...

    2.5 L turbo models
    Your vehicle is equipped with “summer tires” as original equipment, which are inadequate for driving on slippery roads such as on snow-covered or icy roads. Compared with winter and all-season tir ...