Keys
1) Master key (black)
2) Submaster key (black)
3) Valet key (gray)
4) Key number plate
5) Security ID plate
Three types of keys are provided for your
vehicle:
Master key, submaster key and valet key.
The master key and submaster key fit all locks on your vehicle.
- Ignition switch
- Driver’s door
- Glove box
The valet key fits only the ignition switch and driver’s door lock. You can keep the glove box locked when you leave your vehicle and valet key at a parking facility.
Do not attach a large key holder or key case to either key. If it bangs against your knees while you are driving, it could turn the ignition switch from the “ON” position to the “Acc” or “LOCK” position, thereby stopping the engine.
See also:
Checking the brake pedal reserve distance
1) More than 2.56 in (65 mm)
Depress the pedal with a force of approximately
66 lbf (294 N, 30 kgf) and measure
the distance between the upper surface of
the pedal pad and the floor.
When th ...
Changing the coolant
WARNING
Never attempt to remove the radiator cap until the engine has been shut off and
has cooled down completely. Since the coolant is under pressure, you may suffer
serious burns from a spray ...
System alarm operation
The alarm system will give the following alarms when triggered:
● The vehicle’s horn will sound and the turn signal lights will flash for 30
seconds.
● If any door (or the rear gate/tr ...