Tire labeling
Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers. These marking can provide you with useful information on the tire.
See also:
Compass zone adjustment
Compass calibration zones
1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geograp ...
Trailer hitches
WARNING
Never drill the frame or under-body of your vehicle to install a commercial trailer
hitch. If you do, dangerous exhaust gas, water or mud may enter the passenger compartment
through the d ...
Temperature A, B, C
The temperature grades are A (the highest), B, and C, representing the tire’s
resistance to the generation of heat and its ability to dissipate heat when tested
under controlled conditions on a sp ...
