Vehicle Dynamics Control OFF indicator light

The light illuminates when the ignition switch is turned to the “ON” position


The light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system.

The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.

● The light does not illuminate when the ignition switch is turned to the “ON” position.

● The light does not turn off even after a period of approximately 2 seconds after the ignition switch has been turned to the “ON” position.

    See also:

    Outback
    1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens. 6. Tighten the mounting screw ...

    Changing the coolant
    Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray ...

    Vehicle Dynamics Control system
    Always use the utmost care in driving – overconfidence because you are driving a vehicle with the Vehicle Dynamics Control system could easily lead to a serious accident. - Even if yo ...