For CVT models - All-Wheel Drive warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners Manual - Subaru Legacy - SubaruManuals.org

Follow me on Twitter!

For CVT models

Subaru Legacy / Subaru Legacy Owners Manual / Instruments and controls / Warning and indicator lights / All-Wheel Drive warning light (AT and CVT models) / For CVT models

This light illuminates when All-Wheel Drive is disengaged and the drive mechanism is switched to Front Wheel Drive for maintenance or similar purposes. This light flashes if the vehicle is driven with tires of different diameters fitted on its wheels or with the air pressure excessively low in any of its tires.

See also:

System alarm operation
The alarm system will give the following alarms when triggered: ● The vehicle’s horn will sound and the turn signal lights will flash for 30 seconds. ● If any door (or the rear gate/tr ...

Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. ...

Bulb chart
NOTE Lights from A to D are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement. • Bulbs may become very hot while illuminated. Before replacing bulbs, turn off ...