Transmission control system warning - AT OIL TEMP warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners Manual - Subaru Legacy - SubaruManuals.org

Follow me on Twitter!

Transmission control system warning

Subaru Legacy / Subaru Legacy Owners Manual / Instruments and controls / Warning and indicator lights / AT OIL TEMP warning light (AT and CVT models) / Transmission control system warning

If the “AT OIL TEMP” warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately.

See also:

Recommended brake fluid
CAUTION Never use different brands of brake fluid together. Also, avoid mixing DOT 3 and DOT 4 brake fluids even if they are the same brand. ...

Checking the oil level
Check the engine oil level at each fuel stop. 1. Park the vehicle on a level surface and stop the engine. If you check the oil level just after stopping the engine, wait a few minutes for the oil t ...

Setting the alarm-level engine speed
1. Push the trip knob to select “REV” on the combination meter. 2. When the trip knob is pushed for more than 2 seconds, the thousands place flashes. 3. Release your finger from the trip knob once ...