Cruise control set indicator light
Refer to “Cruise control set indicator light”.
See also:
Two separate circuits
Your vehicle has two separate circuit
brake systems. Each circuit works diagonally
across the vehicle. If one circuit of
the brake system should fail, the other half
of the system still works. ...
Compass zone adjustment
Compass calibration zones
1. Refer to the “Compass calibration zones” map shown above to verify that the
compass zone setting is correct for your geographical location.
2. Press and hold the swi ...
When “CHECK DEVICE” is displayed
This message is displayed under the following conditions.
• When there is a short in the USB bus
• When a non-corresponding device (for example a USB mouse) is connected
• When a non-corresponding ...
