See also:

Initializing the registered data
To initialize the registered data, perform the following procedure. 1. Select the “INITIALIZE” menu. 2. Select the “CONFIRM” menu. First “PLEASE WAIT”, then “INITIALIZED” is displayed. The reg ...

Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs. 1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced. 2. Stop the eng ...

Security indicator light
The security indicator light deters potential thieves by indicating that the vehicle is equipped with an immobilizer system. It begins flashing approximately 60 seconds after the ignition switch ...