Power and sound controls
See also:
Callback
1. Select the “CALL BACK” menu.
2. Press the OFF hook switch .
3. Select the desired number by turning
the “TUNE/TRACK/CH” dial.
4. Perform either of the following procedures.
– Press the OFF ho ...
Tires
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to
50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts
by yourself, have the tightening tor ...
High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When
the headlights are on high beam, the high beam indicator light “”
on the combination meter is also on.
To switch b ...