To use as full-automatic climate control system
Place the temperature control dial in the position for your desired temperature, then set the other dials and buttons as described in the following. The system’s functions will then switch to AUTO mode and be controlled automatically.
• Airflow control dial: AUTO position
• Fan speed control dial: AUTO position
See also:
Changing a flat tire
- Do not jack up the vehicle on an
incline or a loose road surface.
The jack can come out of the
jacking point or sink into the
ground and this can result in a
severe accident.
- Use onl ...
Rocking the vehicle
If you must rock the vehicle to free it from
snow, sand, or mud, depress the accelerator
pedal slightly and move the shift
lever/select lever back and forth between
“1”/“D” and “R” repeatedly. ...
P Metric
With the P-Metric system, Section
Width is measured in millimeters.
To convert millimeters into inches,
divide by 25.4. The Aspect Ratio
(Section Height divided by Section
Width) helps provid ...