Front fog light switch (if equipped)

The front fog lights operate only when the light switch is in the “” position.

The front fog lights operate only when the light switch is in the “However, the front fog lights turn off when the headlights are switched to high beam.” position.

However, the front fog lights turn off when the headlights are switched to high beam.

To turn on the front fog lights, turn the front fog light switch on the turn signal lever upward to the “off the front fog lights, turn the switch back down to the “OFF” position.” position. To turn off the front fog lights, turn the switch back down to the “OFF” position.

Non-turbo models
Turbo models

The indicator light on the combination meter will illuminate when the front fog lights are illuminated.
Non-turbo models

The indicator light on the combination meter will illuminate when the front fog lights are illuminated.

    See also:

    Tire pressure monitoring system (TPMS) (U.S.-spec. models)
    Turbo models Non-turbo models The tire pressure monitoring system provides the driver with a warning message by sending a signal from a sensor that is installed in each wheel when tire pressure is s ...

    Rear window wiper and washer switch – 5-door
    : Washer (accompanied by wiper operation) ON: Continuous INT: Intermittent OFF: Off : Washer ...

    Rear seatbelts (except rear center seatbelt on Outback)
    1. Sit well back in the seat. 2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. If the belt stops before reaching the buckle, return the belt slightly and pull ...