Forward and backward adjustment

Pull the lever upward and slide the seat to the desired position. Then release the lever and try to move the seat back and forth to make sure that it is securely locked into place.
Forward and backward adjustment

Pull the lever upward and slide the seat to the desired position. Then release the lever and try to move the seat back and forth to make sure that it is securely locked into place.

    See also:

    Tripped sensor identification
    The security indicator light flashes when the alarm system has been triggered. Also, the number of flashes indicates the location of unauthorized intrusion or the severity of impact on the vehicle ...

    Removing air intake duct
    Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. Refer to “Type A clips” F11-5. ...

    Meter needles/gauge illumination setting (models with type A combination meter)
    When the setting is activated or deactivated, the meter needles and gauge illuminate and turn off as follows. Activated: When the driver’s door is opened while the ignition switch is in the “L ...