Security setting - Setting PIN code
The PIN code is a 4-digit number and is used when locking the phonebook.
1. Select the “SET PIN” menu. Then “CURRENT PIN?” is displayed.
2. Input the current PIN code by operating the “TUNE/TRACK/CH” dial or saying the number.
3. Select the “CONFIRM” menu.
4. Input the new PIN code by operating the “TUNE/TRACK/CH” dial or saying the number.
5. Select the “CONFIRM” menu.
See also:
Parking on a grade
Always block the wheels under both
vehicle and trailer when parking. Apply
the parking brake firmly. You should not
park on a hill or slope. But if parking on a
hill or slope cannot be avoided ...
Meter needles/gauge illumination setting (models with type A combination
meter)
When the setting is activated or deactivated,
the meter needles and gauge
illuminate and turn off as follows.
Activated:
When the driver’s door is opened while
the ignition switch is in the “L ...
Rear seatbelts (except rear center seatbelt on Outback)
1. Sit well back in the seat.
2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted.
If the belt stops before reaching the buckle, return the belt slightly and pull
...