ECO gauge (models with type A combination meter)

The unit displayed varies depending on

The unit displayed varies depending on the model.

The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption.

The ECO gauge indicates the current fuel efficiency as shown in the following chart.

NOTE

NOTE
- The ECO gauge shows only an approximate indication of fuel efficiency.

- After resetting the trip meter, the average rate of fuel consumption is not shown until driving 0.6 mile (1 km).

Until that time, the ECO gauge does not operate.

    See also:

    Pulling off the fender lining
    It is necessary to pull off the fender lining when replacing some bulbs. 1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced. 2. Stop the eng ...

    Moonroof – if moonroof cannot be closed
    If the moonroof cannot be closed with the moonroof switch, you can close the moonroof manually. 1. Take out the screwdriver from the tool bucket. 2. Open the overhead console. Refer to “Overhead c ...

    Setting passkey
    1. Select the “SET PASSKEY” menu. After the currently set passkey is displayed, a new passkey can be entered. 2. Input the new passkey by operating the “TUNE/TRACK/CH” dial. 3. Select the “CONF ...