Power window operation by passengers
Each passenger window can be controlled by the power window switch located on the door.
To open:
Push the switch down and hold it until the window reaches the desired position.
To close:
Pull the switch up and hold it until the window reaches the desired position.
When the lock switch on the power window switch cluster, located on the driver’s side door, is in the “LOCK” position, the passengers’ windows cannot be operated with the passengers’ switches.
See also:
Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender
lining” F11- 7.
2. Remove the bulb cover, by turning it counterclockwise.
3. Disconnect the electrical connector.
...
Checking the fluid level
WARNING
● Never let brake fluid contact your eyes because brake fluid can be harmful
to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly
with clean water. For ...
Warning and indicator lights
Several of the warning and indicator lights illuminate momentarily and then go
out when the ignition switch is initially turned to the “ON” position. This permits
checking the operation of the bul ...