Front turn signal light

NOTE

It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.

1. Turn over the protective cover of the engine compartment.


1. Turn over the protective cover of the engine compartment.

2. Turn the socket counterclockwise and pull it out.


2. Turn the socket counterclockwise and pull it out.

3. Pull out the bulb from the socket and replace the bulb with a new one.

4. After replacing the bulbs, reposition the protective cover of the engine compartment.


4. After replacing the bulbs, reposition the protective cover of the engine compartment.

    See also:

    AT OIL TEMP warning light (AT and CVT models)
    The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminates when t ...

    Low fuel warning light
    The low fuel warning light illuminates when the tank is nearly empty approximately 2.6 US gal (10.0 liters, or 2.2 Imp gal). It only operates when the ignition switch is in the “ON” position. N ...

    Hill start assist system (MT models)
    Ensure that the Hill start assist system operates properly under the following circumstances: 1. Stop the vehicle on an uphill grade by depressing the brake pedal and clutch pedal, with the ...