See also:

To engage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pause for 1 ...

Map light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

Remote start safety features
For safety and security reasons, the system will fail to start and honk the horn twice or shut down the engine during remote start operation if any of the following occur: ● Any of the door ...