See also:

Compass zone adjustment
Compass calibration zones 1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for yo ...

Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. ...

Trailer brakes
WARNING ● Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. ● Do not directly connect your trailer’s hydraulic brake syst ...