Effect vehicle modifications made for persons with disabilities may have on SUBARU advanced frontal airbag system operation (U.S. only)

Changing or moving any parts of the front seats, seat belts, front bumper, front side frame, instrument panel, combination meter, steering wheel, steering column, tire, suspension or floor panel can affect the operation of the SUBARU advanced airbag system. If you have any questions, you may contact the following SUBARU distributors:

There are currently no SUBARU distributors in any other U.S. territories. If you are in such an area, please contact the SUBARU distributor or dealer from which you bought your vehicle.

    See also:

    ABS warning light
    The ABS warning light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. This is an indication that the ABS system is working properl ...

    Coolant temperature low indicator light (if equipped)/Coolant temperature high warning light (if equipped)
    - After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves under any of the following conditions, the electrical system may be malfunctio ...

    Meter/Gauge needle illumination setting (turbo models except STI)
    When the setting is activated or deactivated, the meter needles and gauge needles illuminate and turn off as follows. Activated: When the driver’s door is opened while the ignition switch is in the ...