Installing a booster seat

WARNING

● Child restraint systems and seatbelts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you place a child in it.

● Do not leave an unsecured child restraint system in your vehicle. Unsecured child restraint systems can be thrown around inside of the vehicle in a sudden stop, turn or accident; they can strike and injure vehicle occupants as well as result in serious injuries or death to the child.

CAUTION

When you install a child restraint system, follow the manufacturers instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.

1. Place the booster seat in the rear seating position and sit the child on it.


1. Place the booster seat in the rear seating position and sit the child on it. The child should sit well back on the booster seat.

2. Run the lap and shoulder belt through or around the booster seat and the child following the instructions provided by its manufacturer.

3. Insert the tongue plate into the buckle until you hear a click. Take care not to twist the seatbelt.

Make sure the shoulder belt is positioned across the center of childs shoulder and that the lap belt is positioned as low as possible on the childs hips.

4. To remove the booster seat, press the release button on the seatbelt buckle


4. To remove the booster seat, press the release button on the seatbelt buckle and allow the belt to retract.

WARNING

● Never use a belt that is twisted or reversed. In an accident, this can increase the risk or severity of injury to the child.

● Never place the shoulder belt under the childs arm or behind the childs back. If an accident occurs, this can increase the risk or severity of injury to the child.

● The seatbelt should fit snugly in order to provide full restraint. Loose fitting belts are not as effective in preventing or reducing injury.

● Place the lap belt as low as possible on the childs hips. A high-positioned lap belt will increase the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen, and both can result in serious internal injury or death.

● Make sure the shoulder belt is positioned across the center of childs shoulder. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision.

    See also:

    Brake system warning light
    - Driving with the brake system warning light on is dangerous. This indicates your brake system may not be working properly. If the light remains illuminated, have the brakes inspecte ...

    SRS airbag (Supplemental Restraint System airbag)
    *SRS: This stands for supplemental restraint system. This name is used because the airbag system supplements the vehicles seatbelts. Your vehicle is equipped with a crash sensing and diagnos ...

    Hill Holder indicator light
    WARNING If the Hill Holder indicator light does not illuminate even when the Hill Holder switch is pressed to activate the Hill Holder function, the electronic parking brake system may be malfu ...