Subaru Outback manuals

Subaru Outback (BR): Fuses

CAUTION

Never replace a fuse with one having a higher rating or with material other than a fuse because serious damage or a fire could result.

The fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. The fuses are located in two fuse boxes.

One is located under the instrument panel behind the fuse box cover on the driver’s


One is located under the instrument panel behind the fuse box cover on the driver’s seat side. To remove the cover, pull it out.

The other one is housed in the engine compartment.


The other one is housed in the engine compartment.

The spare fuses are stored in the main fuse box cover in the engine compartment.


The spare fuses are stored in the main fuse box cover in the engine compartment.

The fuse puller is stored in the main fuse box in the engine compartment.


The fuse puller is stored in the main fuse box in the engine compartment.

1) Good


1) Good
2) Blown

If any lights, accessories or other electrical controls do not operate, inspect the corresponding fuse. If a fuse has blown, replace it.

1. Turn the ignition switch to the “LOCK” position and turn off all electrical accessories.

2. Remove the cover.

3. Determine which fuse may be blown. Look at the back side of each fuse box cover and refer to “Fuses and circuits” F12-10.

4. Pull out the fuse with the fuse puller.


4. Pull out the fuse with the fuse puller.

5. Inspect the fuse. If it has blown, replace it with a spare fuse of the same rating.

6. If the same fuse blows again, this indicates that its system has a problem. Contact your SUBARU dealer for repairs.

READ NEXT:

 Main fuse

Main fuse box The main fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. Check the main fuses if any electrical component fails to

 Replacing bulbs

WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down, Otherwise, there is the risk of sustaining a burn injury. CAU

SEE MORE:

 Loading all the magazine (full disc loading mode)

1. If you continue to press the “LOAD” button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashes and “ALL LOAD” indicator illuminates, insert a disc within 15 seconds. If a disc is successf

 If the light illuminates constantly

If the light illuminates constantly while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by an authorized SUBARU dealer immediately. NOTE This light also illuminates when the fuel filler cap is

© 2010-2024 Copyright www.suoutback.com