Subaru Outback (BR): Checking the clutch function
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Clutch pedal (MT models) / Checking the clutch function
Check the clutch engagement and disengagement.
1. With the engine idling, check that there are no abnormal noises when the clutch pedal is depressed, and that shifting into 1st or reverse feels smooth.
2. Start the vehicle by releasing the pedal slowly to check that the engine and transmission smoothly couple without any sign of slippage.
READ NEXT:
Checking the clutch pedal free play
1) 0.19 – 0.44 in (5 – 11 mm)
Lightly press the clutch pedal down with your finger until you feel resistance,
and check the free play.
If the free play is not within proper specification, co
Replacement of brake pad and lining
CAUTION
If you continue to drive despite the scraping noise from the audible brake pad
wear indicator, it will result in the need for costly brake rotor repair or replacement.
The right front di
Breaking-in of new brake pads and linings
When replacing the brake pad or lining, use only genuine SUBARU parts. After
replacement, the new parts must be broken in as follows:
SEE MORE:
Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic
transmission, check to see that the fluid level is between the lower level and upper
level on the “COLD” range. If it is below that range, add fluid up to the upper
level. Be careful not to overfill.
CAUTION
Be
Power Steering Oil Pump
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the V-belts. <Ref. to ME(H4SO)-43, REMOVAL, V-belt.>
3) Remove the power steering oil pump assembly.
Disconnect the connector from power steering pump switch.
Disconnect the pressure hose (b) and suction hose (a)
© 2010-2024 Copyright www.suoutback.com
