Subaru Outback (BR): Checking the oil level in AT models
AT models
1) Yellow handle
1. Park the vehicle on a level surface and stop the engine.
2. Pull out the level gauge, wipe it clean, and insert it again.
1) Upper level
2) Lower level
3. Pull out the level gauge again and check the oil level on it. If it is below the lower level, add oil to bring the level up to the upper level.
CAUTION
Exercise caution to prevent any spillage of front differential gear oil during the refilling process. Contact between the oil and the exhaust pipe can result in unpleasant odors, smoke, and potential fire hazards. If oil comes into contact with the exhaust pipe, ensure to wipe it off immediately.
READ NEXT:
There is no oil level gauge. To check the front differential gear oil level,
we recommend that you consult your SUBARU dealer for inspection.
There is no oil level gauge. To check the rear differential gear oil level, we
recommend that you consult your SUBARU dealer for inspection.
SEE MORE:
1) Air intake duct 2) Air cleaner case 3) Clamp
1. Remove the hydraulic hose in the power steering system from the clip on the
air intake duct.
2. Remove the hydraulic hose from the clip on the right side of the air cleaner
case.
3. Unsnap the two clamps holding the air cleaner case cover.
Driver’s side
Passenger’s side
To increase the temperature setting, press the “”
side of the temperature control button. To decrease the temperature setting, press
the “” side of the temperature control
button.
Each temperature setting is shown on the display. When the “LO
© 2010-2024 Copyright www.suoutback.com