Subaru Outback (BR): Turbo models
1) Air intake duct 2) Air cleaner case 3) Clamp
1. Remove the hydraulic hose in the power steering system from the clip on the
air intake duct.
2. Remove the hydraulic hose from the clip on the right side of the air cleaner
case.
3. Unsnap the two clamps holding the air cleaner case cover.
4. Open the air cleaner case and remove the air cleaner element.
5. Clean the inside of the air cleaner case and case cover with a damp cloth
and install a new air cleaner element.
6. If the air cleaner case has been removed, insert the three projections on
the air cleaner case into the slits on the air cleaner case cover.
7. Install the removed parts in the reverse order of removal.
READ NEXT:
It may be difficult to replace the spark plugs. It is recommended that you have
the spark plugs replaced by your SUBARU dealer.
The spark plugs should be replaced according to the maintenance sched
Refer to “Electrical system” F12-8.
It is unnecessary to check the deflection of the drive belt periodically because
your engine is equipped with an automatic belt tension adjuster. However, replacement
of the belt should be done ac
SEE MORE:
CAUTION
● When washing the vehicle, the brakes may get wet. As a result, the brake stopping
distance will be longer. To dry the brakes, drive the vehicle at a safe speed while
lightly pressing the brake pedal to heat up the brakes.
● Do not wash the engine compartment and areas adj
The light control switch only operates when the key is inserted into the ignition
switch.
Regardless of the position of the light control switch, the illuminated lights
are turned off when the key is removed from the ignition switch.
NOTE
● Even if the key is removed from the ignition s
© 2010-2024 Copyright www.suoutback.com