Subaru Outback manuals

Subaru Outback (BR): Engine coolant

READ NEXT:

 Checking the coolant level

Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “LOW” level mark

 Changing the coolant

WARNING Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray

 Air cleaner element

WARNING Do not operate the engine with the air cleaner element removed. The air cleaner element not only filters intake air but also stops flames if the engine backfires. If the air cleaner eleme

SEE MORE:

 Rear Shelf Trim

A: REMOVAL 1) Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. CAUTION: The airbag system is fitted with a backup power supply. After disconnecting the battery ground cable, the airbag may operate if you do not wait for 60 seconds before starting the

 Keyless Entry Control Module

A: REMOVAL 1. SEDAN MODEL 1) Disconnect the ground cable from battery. 2) Remove the rear shelf trim. <Ref. to EI-120, REMOVAL, Rear Shelf Trim.> 3) Remove the keyless entry control module. Disconnect the connector. Remove the bolt and remove the keyless entry control module. 2. OUTBACK

© 2010-2024 Copyright www.suoutback.com