Subaru Outback (BR): Removing air intake duct
Use a screwdriver to undo the clips on the air intake duct, then remove the air
intake duct. Refer to “Type A clips” F11-5.
READ NEXT:
It is necessary to pull off the fender lining when replacing some bulbs.
1. Start the engine and turn the steering wheel fully in the opposite direction
of the bulb to be replaced.
2. Stop the eng
To open the hood:
1. If the wiper blades are lifted off the windshield, return them to their original
positions.
2. Pull the hood release knob under the instrument panel.
3. Release the secon
SEE MORE:
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the bumper face assembly.
Remove the clips, turn over the front mud guard, and disconnect the fog
light connector. (Model with
fog light)
Remove the clips at the upper side of the bumper.
Remove the clips from the fender.
The cargo area cover can be stowed in under the cargo floor.
1. To open the lid, pull the handle up.
2. To keep the lid open, hang the hook (provided on the back of the lid) on the
rear edge of the roof.
3. Remove the left and right parts of the cargo floor lid.
4. Stow the cover housi
© 2010-2024 Copyright www.suoutback.com