Subaru Outback (BR): When checking or servicing in the engine compartment (2.5 L non-turbo models)
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service / Maintenance precautions / When checking or servicing in the engine compartment (2.5 L non-turbo models)
CAUTION
Do not contact the belt cover while checking the components in the engine compartment. Doing so may cause your hand to slip off the belt cover and result in an unexpected injury.
READ NEXT:
When checking or servicing in the engine compartment while the engine is running
WARNING
A running engine can be dangerous. Keep your fingers, hands, clothing, hair and
tools away from the cooling fan, belts and any other moving engine parts. Removing
rings, watches and ties
Maintenance tips
Some clips and fender linings must be removed before replacing the air cleaner
elements or specific bulbs.
Removing and reinstalling clips
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center
portion of the clip is raise
SEE MORE:
ABS warning light
The ABS warning light illuminates when the ignition switch is turned to the “ON”
position and turns off after approximately 2 seconds.
This is an indication that the ABS system is working properly.
CAUTION
● If any of the following conditions occur, we recommend that you have the AB
Rear Hub Unit Bearing
A: REMOVAL
1) Lift up the vehicle, and then remove the rear wheels.
2) Remove the axle nut.
CAUTION:
Do not loosen the axle nut while the rear axle is loaded. Doing so may damage
the hub bearing.
Lift the crimped section of axle nut.
Remove the axle nut using a socket wrench while depressing th
© 2010-2024 Copyright www.suoutback.com
