Subaru Outback (BR): Before checking or servicing in the engine compartment
WARNING
● Always stop the engine and apply the parking brake to prevent the vehicle from
moving.
● Always let the engine cool down. Engine parts become very hot when the engine
is running and remain hot for some time after the engine is stopped.
● Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot
engine components. This may cause a fire.
● Always remove the key from the ignition switch. When the ignition switch is in
the “ON” position, the cooling fan may operate suddenly even when the engine is
stopped.
● Before performing any servicing on a vehicle equipped with a remote engine start
system temporarily place that system in the service mode to prevent it from unexpectedly
starting the engine.
READ NEXT:
CAUTION
Do not contact the belt cover while checking the components in the engine compartment.
Doing so may cause your hand to slip off the belt cover and result in an unexpected
injury.
WARNING
A running engine can be dangerous. Keep your fingers, hands, clothing, hair and
tools away from the cooling fan, belts and any other moving engine parts. Removing
rings, watches and ties
Some clips and fender linings must be removed before replacing the air cleaner
elements or specific bulbs.
SEE MORE:
Each brief press of the “MENU” button changes the control modes in the following
sequence.
Choose the desired settings for each mode by turning the “TUNE/TRACK/CH” dial.
The control function returns to the tune/ track/channel control mode after approximately
5 seconds.
SVC setting
WARNING
The brightness of the illumination of the high beam headlights is reduced by
the daytime running light system. The light switch must always be turned to the
“” position when it is dark outside.
The high beam headlights will automatically illuminate at reduced brightness
when the
© 2010-2024 Copyright www.suoutback.com