Subaru Outback (BR): Maintenance and service
Subaru Outback (BR) 2010-2015 Owners Manual / Maintenance and service
- Maintenance schedule
- Maintenance precautions
- Before checking or servicing in the engine compartment
- When checking or servicing in the engine compartment (2.5 L non-turbo models)
- When checking or servicing in the engine compartment while the engine is running
- Maintenance tips
- Engine hood
- Engine compartment overview
- Engine oil
- Cooling system
- Air cleaner element
- Spark plugs
- Drive belts
- Manual transmission oil
- Automatic transmission fluid
- Continuously variable transmission fluid
- Front differential gear oil (AT and CVT models)
- Rear differential gear oil
- Power steering fluid
- Brake fluid
- Clutch fluid (MT models)
- Brake pedal
- Clutch pedal (MT models)
- Replacement of brake pad and lining
- Tires and wheels
- Types of tires
- Tire pressure monitoring system (TPMS) (if equipped)
- Tire inspection
- Tire pressures and wear
- Wheel balance
- Wear indicators
- Tire rotation direction mark
- Tire rotation
- Tire replacement
- Wheel replacement
- Aluminum wheels
- Windshield washer fluid
- Replacement of wiper blades
- Windshield wiper blade assembly
- Windshield wiper blade rubber
- Rear window wiper blade assembly (Outback)
- Rear window wiper blade rubber (Outback)
- Battery charging, fluid level
- Fuses
- Main fuse
- Replacing bulbs
READ NEXT:
Maintenance schedule
The scheduled maintenance items required to be serviced at regular intervals
are shown in the “Warranty and Maintenance Booklet”.
For details about your maintenance schedule, read the separate
Maintenance precautions
When maintenance and service are required, it is recommended that all work be
done by an authorized SUBARU dealer.
If you perform maintenance and service by yourself, you should familiarize yoursel
Before checking or servicing in the engine compartment
WARNING
● Always stop the engine and apply the parking brake to prevent the vehicle from
moving.
● Always let the engine cool down. Engine parts become very hot when the engine
is ru
SEE MORE:
Scalp Cap
A: REPLACEMENT
1. MODEL WITHOUT ELECTRIC RETRACTABLE MIRROR
CAUTION:
When removing the mirror, be careful not to damage the back surface
of mirror with a flat tip screwdriver.
When installing the mirror, insert the connector and clip securely.
1) Operate the remote control mirror switch to fac
Keyless Entry Control Module
A: REMOVAL
1. SEDAN MODEL
1) Disconnect the ground cable from battery.
2) Remove the rear shelf trim. <Ref. to EI-120, REMOVAL, Rear Shelf Trim.>
3) Remove the keyless entry control module.
Disconnect the connector.
Remove the bolt and remove the keyless entry control module.
2. OUTBACK
© 2010-2024 Copyright www.suoutback.com
