Subaru Outback manuals

Subaru Outback (BR): Cleaning aluminum wheels

● Promptly wipe the aluminum wheels clean of any kind of grime or agent. If dirt is left on too long, it may be difficult to clean off.

● Do not use soap containing grit to clean the wheels. Be sure to use a neutral cleaning agent, and later rinse thoroughly with water. Do not clean the wheels with a stiff brush or expose them to a high-speed washing device.

● Clean the vehicle (including the aluminum wheels) with water as soon as possible when it has been splashed with sea water, exposed to sea breezes, or driven on roads treated with salt or other agents.

READ NEXT:

 Corrosion protection

Your SUBARU has been designed and built to resist corrosion. Special materials and protective finishes have been used on most parts of the vehicle to help maintain fine appearance, strength, and r

 Most common causes of corrosion

The most common causes of corrosion are: 1. The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. 2. Damage to paint and other protective coatin

 To help prevent corrosion

Wash the vehicle regularly to prevent corrosion of the body and suspension components. Also, wash the vehicle promptly after driving on any of the following surfaces. ● roads that have been s

SEE MORE:

 Tire inspection

Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. Contact your SUBARU dealer immediately if you find any problem. NOTE ● When the wheels and tires strike curbs or are subjected to harsh treatment a

 FRESH/RECIRC Door Actuator

A: REMOVAL 1) Set the intake door actuator to RECIRC position. Turn the ignition switch to ON. Operate the control panel and switch to RECIRC mode. In the condition of step (2), turn the ignition switch to OFF. 2) Remove the instrument panel assembly. <Ref. to EI-76, REMOVAL, Instrument Pan

© 2010-2024 Copyright www.suoutback.com