Subaru Outback (BR): Rear gate (Outback) – if the rear gate cannot be unlocked
In the event that you cannot unlock the rear gate by operating the power door
locking switches or the remote keyless entry system, you can unlock it from inside
the cargo area.
1. Remove the access cover at the bottom-center of the rear gate trim using flat-head
screwdriver.
2. Locate the rear gate lock release lever behind the rear gate trim panel.
CAUTION
Never operate the rear gate lock release lever with your fingers because doing
so may cause an injury. Always use a flat-head screwdriver or a similar tool.
3. To unlock the rear gate, turn the lever to the right position using a flat-head
screwdriver or a similar tool.
4. Open the rear gate from outside by raising the rear gate handle.
READ NEXT:
If the moonroof cannot be closed with the moonroof switch, you can close the
moonroof manually.
1. Take out the screwdriver from the tool bucket.
2. Open the overhead console. Refer to “Overhead
SEE MORE:
WARNING
Never exceed the maximum load limits explained in the following. Exceeding the
maximum load limits could cause personal injury and/or vehicle damage.
CAUTION
● Adequate size trailer brakes are required when the trailer and its cargo exceed
1,000 lbs (453 kg) total weight.
χ
A: COMPONENT
1. FRONT UNDER COVER
Small type
Medium type
Large type
Tightening torque: N*m (kgf-m, ft-lb)
T: 17.5 (1.78, 12.9)
2. FLOOR UNDER PROTECTOR
Tightening torque: N*m (kgf-m, ft-lb)
T: 7.5 (0.76, 5.5)
3. FUEL TANK PROTECTOR
Fuel tank protector RH
F
© 2010-2024 Copyright www.suoutback.com