Subaru Outback (BR): Vehicle Dynamics Control system monitor
READ NEXT:
The light illuminates when the ignition switch is turned to the “ON” position
and turns off several seconds after the engine has started. This lighting pattern
indicates that the Vehicle Dyn
The light will turn on when the ignition switch is set to the "ON" position and will automatically turn off after about 2 seconds. Additionally, the light will illuminate if the Vehicle Dy
Pressing the switch to deactivate the Vehicle Dynamics Control system can facilitate
the following operations.
● a standing start on a steeply sloping road with a snowy, gravel-covered, or
SEE MORE:
NOTE
All vehicle doors, the engine hood and trunk / rear gate must be closed prior
to activating the remote engine start system. Any open entry point will prevent
starting or cause the system to shut down.
The remote engine start function is activated by pressing the “”
button twice wi
A: OPERATION
1) While the ABS sequence control is being performed, the operation of the
hydraulic unit can be checked using
the brake tester or pressure gauge after the hydraulic unit solenoid valve
operation.
2) ABS sequence control can be started by the Subaru Select Monitor.
1. ABS SEQUENCE CO
© 2010-2024 Copyright www.suoutback.com