Subaru Outback (BR): ABS system self-check
You may feel a slight shock in the brake pedal and hear the operating sound of
ABS from the engine compartment just after the vehicle is started. This is caused
by an automatic functional test of the ABS system being carried out and does not
indicate any abnormal condition.
READ NEXT:
The ABS warning light illuminates when the ignition switch is turned to the “ON”
position and turns off after approximately 2 seconds.
This is an indication that the ABS system is working pro
The EBD system maximizes the effectiveness of the brakes by allowing the rear
brakes to supply a greater proportion of the braking force. It functions by adjusting
the distribution of braking forc
If a malfunction occurs in the EBD system, the system stops working and the brake
system warning light and ABS warning light illuminate simultaneously.
The EBD system may be malfunctioning if the
SEE MORE:
When the ignition switch is turned to the “ON” position, the various parts of
the combination meter are illuminated in the following sequence.
1. Warning lights, indicator lights, meter needles, gauge needles, odometer and
trip meter back light illuminate.
2. Meter needles and gauge needle
A: PROCEDURE
B: ACTIVATION OF MALFUNCTION
INDICATOR LIGHT
1) When the ignition switch is turned to ON (engine
OFF), the malfunction indicator light (A) in the combination
meter illuminates.
NOTE:
If the malfunction indicator light does not illuminate,
perform diagnostics of the malfunction indicat
© 2010-2024 Copyright www.suoutback.com