Subaru Outback (BR): Braking tips
WARNING
Never rest your foot on the brake pedal while driving. This can cause dangerous
overheating of the brakes and needless wear on the brake pads and linings.
READ NEXT:
When driving in rain or after washing the vehicle, the brakes may get wet. As
a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle
at a safe speed while lightly d
Remember to make use of engine braking in addition to foot braking. When descending
a grade, if only the foot brake is used, the brakes may start working improperly
because of brake fluid overheat
Do not depress the brake pedal suddenly when a tire is punctured. This could cause a loss of control of the vehicle. Keep driving straight ahead while gradually reducing speed. Then slowly pull off
SEE MORE:
1. Pull out the end of the blade rubber assembly to unlock it from the plastic
support.
2. Pull the blade rubber assembly out of the plastic support.
1) Metal spines
3. If the new blade rubber is not provided with two metal spines, remove the
metal spines from the old blade rubber and i
A: REMOVAL
1) Remove the transmission assembly from the vehicle.
<Ref. to 5AT-37, REMOVAL, Automatic Transmission Assembly.>
2) Pull out the torque converter assembly. <Ref. to 5AT-63, REMOVAL, Torque Converter Assembly.>
3) Remove the transmission harness connector from stay.
4) Re
© 2010-2024 Copyright www.suoutback.com