Subaru Outback manuals

Subaru Outback (BR): N (Neutral)

This position is for restarting a stalled engine.

In this position the wheels and transmission are not locked. In this position, the transmission is neutral; the vehicle will roll freely, even on the slightest incline unless the parking brake or foot brake is applied. Avoid coasting with the transmission neutral.

During coasting, there is no engine braking effect.

NOTE

● To protect the engine while the “N” position is selected, the engine is controlled such that the engine speed may not become too high even if the accelerator pedal is depressed hard.

● If the select lever is in the “N” position when you stop the engine for parking, you may not subsequently be able to move it to the “R” and “P” positions. If this happens, turn the ignition switch to the “ON” position. You will then be able to move the select lever to the “P” position.

WARNING

Do not drive the vehicle with the select lever in the “N” (neutral) position. Engine braking has no effect in this condition and the risk of an accident is consequently increased.

READ NEXT:

 D (Drive)

This position is for normal driving. The transmission automatically shifts into a suitable gear according to the vehicle speed and the acceleration you require. When more acceleration is required

 Shift lock function

The shift lock function helps prevent the improper operation of the select lever. ● The select lever cannot be operated unless the ignition switch is turned to the “ON” position and the b

 Shift lock release

If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the select lever button pressed and brake ped

SEE MORE:

 Basic Diagnostic Procedure of Automatic Transmission

A: PROCEDURE Check List for Interview A: CHECK Check the following items when a problem has occurred. NOTE: Use copies of this page for interviewing customers. General Description A: CAUTION 1. SUPPLEMENTAL RESTRAINT SYSTEM "AIRBAG" The airbag system wiring harness is routed

 Transmission Harness

A: REMOVAL 1) Remove the transmission from the vehicle. <Ref. to CVT-55, REMOVAL, Automatic Transmission Assembly.> 2) Prepare for overhaul. <Ref. to CVT-135, Preparation for Overhaul.> 3) Remove the transmission harness ground terminal and remove the harness connectors from front wh

© 2010-2024 Copyright www.suoutback.com